NEW! Subaru FB20 Turbo Kit for 2018+ Crosstrek and 2017+ Impreza
NEW TURBO KIT FROM AVO TURBOWORLD!
AVO Turboworld GlobalTurbo Kit for the:
2018+ Subaru Crosstrek XV FB20
2018+ Subaru Forester SK FB20
2017+ Subaru Impreza FB20
Though this kit was designed with the 2018+ Subaru Crosstrek in mind, it does fit the 2017+ FB20 that is offered in other models. The difference being the tuning aspect of the kit, which would require you to contact our customer service team to confirm what stock ECU your FB20 car is running. IE: Hitachi or Denso. With this information, we will be able to provide a kit that will work for your Foresteror Impreza of that same FB20 model range.
AVO Turboworld loves this best seller from Subaru but we were disappointed in the available engine choices. It really should have gotten the turbocharged motor from the WRX, but Subaru decided not to. So there was only one thing to do!
AVO Turboworld has drawn upon its extensive history in turbocharger kits to design this low mounted, high response turbocharger kit that will increase engine output nearly 80%! The Subaru XV is a great chassis in search of more power, and that is what we deliver! Similar to our popular turbocharger kit for the Subaru BRZ/ FR-S and our earlier model XV, it is mounted underneath the engine, very similar to the factory setup of the new WRX. This short runner setup maximizes boost response and minimizes lag, providing the torque the car craves.
The AVO Turboworld Turbocharger kit is designed to work with both RHD and LHD models in all countries. The turbocharger kit is designed from top to bottom specifically to the XV, and consists of all the parts necessary to bolt the kit up to the car. It utilizes an AVO 18/49 billet turbocharger that mounts up under the front of the engine via our ceramic-coated stainless steel equal exhaust manifold, and then has a flange to fabricate your own exhaust. There is an option for a front pipe assembly that can bolt to your standard Subaru OEM cat-back exhaust system.
Cooling the pressurized air is an aluminum bar and plate front mount intercooler which uses stainless piping throughout. An mechanical oil scavenging pump that works off the back of the driver’s side camshaft, oil reservoir tank, and all necessary water and oil hoses and fittings are included in the kit. This turbo kit has been designed to bolt up to the stock air intake box and to the stock cat back exhaust system.
The FMIC (intercooler) has been specifically designed to fit with the standard bumper without trimming as well. Black wire-reinforced silicone hosing is used out of the turbocharger plus silicon connectors.
So what can you expect from this kit? tested in Thailand we seen from 120hp up to 190hp @ 5psi boost over a 50% power increase.
What transforms the feeling of the car is the torque. With this turbocharger kit the torque comes on early, providing that big engine feel that the Crosstrek lacks. Torque that's not only useful for getting up a hill, but useful when you are towing a trailer or carrying a bunch of gear into the mountains for a weekend getaway!
Supplied with the Stage 1 turbocharger kit:
• Turbo PCV Valve
• Filler Neck Oil Return • Quality Mechanical Oil Scavenge Pump
• Bolt-On BOV
• No ECU tune OR MAP in Base kit
Tuning:
Tuning for this vehicle is only via Subaru EDIT Software https://www.epifansoft.com/subaruEdit.html
The Tuning cable is VIA https://www.tactrix.com